Konfigurasi Routing Dynamic OSPF Multi Area 3 Router Cisco Packet Tracer



Pembahasan mengenai routing OSPF sudah kita bahas di materi tutorial sebelumnya, selanjutnya kita akan melanjutkan konfigurasi routing OSPF multi area sesuai topologi diatas, let's go !!!

Konfigurasi :

Router-1 

Router-1>en
Router-1#conf t
Router-1(config)#int fa 0/0
Router-1(config-if)#no sh
Router-1(config-if)#ip add 100.100.100.1 255.255.255.252

Router-1(config-if)#int fa 0/1
Router-1(config-if)#no sh
Router-1(config-if)#ip add 10.10.10.1 255.255.255.248

Router-2

Router-2>en
Router-2#conf t
Router-2(config)#int fa 0/0
Router-2(config-if)#no sh
Router-2(config-if)#ip add 100.100.100.2 255.255.255.252


Router-2(config-if)#int fa 0/1
Router-2(config-if)#no sh
Router-2(config-if)#ip add 200.200.200.1 255.255.255.252


Router-2(config-if)#int eth 0/0/0
Router-2(config-if)#no sh
Router-2(config-if)#ip add 20.20.20.1 255.255.255.240


Router-3

Router-3>en
Router-3#conf t
Router-3(config-if)#int fa 0/1
Router-3(config-if)#no sh
Router-3(config-if)#ip add 200.200.200.2 255.255.255.252

Router-3(config-if)#int fa0/0
Router-3(config-if)#no sh
Router-3(config-if)#ip add 30.30.30.1 255.255.255.224


KONFIGURASI ROUTING OSPF PADA SETIAP ROUTER

Router-1

Router-1(config)#router ospf 1
Router-1(config-router)#network 100.100.100..0 0.0.0.3 area 0
Router-1(config-router)#network 10.10.10.0 0.0.0.7 area 0

Router-2

Router-2(config)#router ospf 1
Router-2(config-router)#network 100.100.100.0 0.0.0.3 area 0
Router-2(config-router)#network 20.20.20.0 0.0.0.15 area 0
Router-2(config-router)#network 200.200.200.0 0.0.0.3 area 10

Router-3
Router-3(config)#router ospf 1
Router-3(config-router)#network 200.200.200.0 0.0.0.3 area 10
Router-3(config-router)#network 30.30.30.0 0.0.0.31 area 10

Ubah konfigurasi Ip pada laptop client, sesuai dengan topologi diatas.
ujicoba ping dari client 1 ke client 2 dan 3.

Catatan :

Process-id itu bisa digunakan antara nomor 1 dan 65,535. 

Area-id itu dapat digunakan dari angka 0 to 65,535.

Dalam OSPF setidaknya kita harus punya area 0. area 0 sering disebut sebagai backbone dan setiap area2 lainnya yang ingin dibuat harus terkoneksi ke area 0. Bila router tersebut dalam ruang lingkup backbone, maka area-idnya harus 0.

Cara verifikasi/cek Konfigurasi OSPF :

Router#show ip protocol
Router#show ip route
Router#show ip ospf interface
Router#show ip ospf
Router#show ip ospf neighbor detail
Router#show ip ospf database

Posted by Faiz Abdul Rokhman, S.Kom on Saturday, October 1, 2022
categories: , |

0 comments

Post a Comment

Terimakasih atas kunjungannya